missing header for unified diff at line 3 of patch
can't find file to patch at input line 3
Perhaps you used the wrong -p or --strip option?
The text leading up to this was:

../../ov51x-jpeg-1.5.3/ov51x-jpeg-core.c 2007-11-01 17:19:37.000000000 +0100
ov51x-jpeg-core.c 2007-11-18 19:56:30.000000000 +0100

File to patch: ov51x-jpeg-core.c
ov51x-jpeg-core.c: No such file or directory
Skip this patch? [y] n
File to patch:

Code:
rmmod ov511 cd /home/ton dossier/ov51x-jpeg-1.5.9

patrice@patrice:~/ov51x-jpeg-1.5.9$ rmmod ov511 cd /home/patrice/ov51x-jpeg-1.5.9
ERROR: Module ov511 does not exist in /proc/modules
ERROR: Module cd does not exist in /proc/modules
ERROR: Module ov51x_jpeg_1 does not exist in /proc/modules
patrice@patrice:~/ov51x-jpeg-1.5.9$ cd /
patrice@patrice:/$ patch -p1 < ov51x_jpeg_core.noblock.patch.txt
bash: ov51x_jpeg_core.noblock.patch.txt: Aucun fichier ou dossier de ce type
patrice@patrice:/$ cd /home/patrice
patrice@patrice:~$ patch -p1 < ov51x_jpeg_core.noblock.patch.txt
missing header for unified diff at line 3 of patch
can't find file to patch at input line 3
Perhaps you used the wrong -p or --strip option?
The text leading up to this was:

../../ov51x-jpeg-1.5.3/ov51x-jpeg-core.c 2007-11-01 17:19:37.000000000 +0100
ov51x-jpeg-core.c 2007-11-18 19:56:30.000000000 0100

File to patch: ov51x-jpeg-core.c
ov51x-jpeg-core.c: No such file or directory
Skip this patch? [y]

File to patch: ov51x-jpeg-core.c
patching file ov51x-jpeg-core.c
Reversed (or previously applied) patch detected! Assume -R? [n] r
Apply anyway? [n] y
Hunk #1 FAILED at 212.
Hunk #2 FAILED at 313.
Hunk #3 FAILED at 5724.
Hunk #4 FAILED at 6389.
4 out of 4 hunks FAILED -- saving rejects to file ov51x-jpeg-core.c.rej
patrice@patrice:~/ov51x-jpeg-1.5.9$ make
make -C /lib/modules/2.6.28-16-generic/build M=/home/patrice/ov51x-jpeg-1.5.9 modules
make[1]: entrant dans le répertoire « /usr/src/linux-headers-2.6.28-16-generic »
CC [M] /home/patrice/ov51x-jpeg-1.5.9/ov51x-jpeg-core.o
CC [M] /home/patrice/ov51x-jpeg-1.5.9/ov511-decomp.o
CC [M] /home/patrice/ov51x-jpeg-1.5.9/ov518-decomp.o
CC [M] /home/patrice/ov51x-jpeg-1.5.9/ov519-decomp.o
LD [M] /home/patrice/ov51x-jpeg-1.5.9/ov51x-jpeg.o
Building modules, stage 2.
MODPOST 1 modules
CC /home/patrice/ov51x-jpeg-1.5.9/ov51x-jpeg.mod.o
LD [M] /home/patrice/ov51x-jpeg-1.5.9/ov51x-jpeg.ko
make[1]: quittant le répertoire « /usr/src/linux-headers-2.6.28-16-generic »
patrice@patrice:~/ov51x-jpeg-1.5.9$ sudo make install
[sudo] password for patrice:
make -C /lib/modules/2.6.28-16-generic/build M=/home/patrice/ov51x-jpeg-1.5.9 modules
make[1]: entrant dans le répertoire « /usr/src/linux-headers-2.6.28-16-generic »
Building modules, stage 2.
MODPOST 1 modules
make[1]: quittant le répertoire « /usr/src/linux-headers-2.6.28-16-generic »
make -C /lib/modules/2.6.28-16-generic/build M=/home/patrice/ov51x-jpeg-1.5.9 modules_install
make[1]: entrant dans le répertoire « /usr/src/linux-headers-2.6.28-16-generic »
INSTALL /home/patrice/ov51x-jpeg-1.5.9/ov51x-jpeg.ko
DEPMOD 2.6.28-16-generic
make[1]: quittant le répertoire « /usr/src/linux-headers-2.6.28-16-generic »
depmod -a
patrice@patrice:~/ov51x-jpeg-1.5.9$ sudo modprobe ov51x-jpeg

patrice@patrice:~/ov51x-jpeg-1.5.9$ sudo modprobe videdodev
FATAL: Module videdodev not found.
patrice@patrice:~/ov51x-jpeg-1.5.9$ sudo modprobe videodev
patrice@patrice:~/ov51x-jpeg-1.5.9$ sudo insmod ./ov51x-jpeg.ko
insmod: error inserting './ov51x-jpeg.ko': -1 File exists
patrice@patrice:~/ov51x-jpeg-1.5.9$

patrice@patrice:~$ sudo lsusb
[sudo] password for patrice:
Bus 001 Device 006: ID 062a:0000 Creative Labs Optical mouse
Bus 001 Device 005: ID 093a:2460 Pixart Imaging, Inc. Q-TEC WEBCAM 100
Bus 001 Device 004: ID 413c:9001 Dell Computer Corp.
Bus 001 Device 003: ID 413c:a005 Dell Computer Corp. Internal 2.0 Hub
Bus 001 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub
Bus 005 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
Bus 004 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
Bus 003 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
Bus 002 Device 005: ID 0b97:7762 O2 Micro, Inc. Oz776 SmartCard Reader
Bus 002 Device 004: ID 413c:8140 Dell Computer Corp. Wireless 360 Bluetooth
Bus 002 Device 003: ID 0b97:7761 O2 Micro, Inc. Oz776 1.1 Hub
Bus 002 Device 002: ID 413c:a005 Dell Computer Corp. Internal 2.0 Hub
Bus 002 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
patrice@patrice:~$

[ 0.856095] AppArmor: AppArmor Filesystem Enabled
[ 0.860021] Switched to high resolution mode on CPU 0
[ 0.860711] Switched to high resolution mode on CPU 1
[ 0.864025] pnp: PnP ACPI init
[ 0.864038] ACPI: bus type pnp registered
[ 0.910934] pnp 00:02: io resource (0x1000-0x1005) overlaps 0000:00:1f.0 BAR 7 (0x1000-0x107f), disabling
[ 0.910939] pnp 00:02: io resource (0x1008-0x100f) overlaps 0000:00:1f.0 BAR 7 (0x1000-0x107f), disabling
[ 0.911073] pnp 00:03: io resource (0x1006-0x1007) overlaps 0000:00:1f.0 BAR 7 (0x1000-0x107f), disabling
[ 0.911078] pnp 00:03: io resource (0x100a-0x1059) overlaps 0000:00:1f.0 BAR 7 (0x1000-0x107f), disabling
[ 0.911082] pnp 00:03: io resource (0x1060-0x107f) overlaps 0000:00:1f.0 BAR 7 (0x1000-0x107f), disabling
[ 0.911087] pnp 00:03: io resource (0x1010-0x102f) overlaps 0000:00:1f.0 BAR 7 (0x1000-0x107f), disabling
[ 0.956549] pnp: PnP ACPI: found 15 devices
[ 0.956553] ACPI: ACPI bus type pnp unregistered
[ 0.956558] PnPBIOS: Disabled by ACPI PNP
[ 0.956573] system 00:00: iomem range 0x0-0x9fbff could not be reserved
[ 0.956578] system 00:00: iomem range 0x9fc00-0x9ffff could not be reserved
[ 0.956582] system 00:00: iomem range 0xc0000-0xcffff could not be reserved
[ 0.956587] system 00:00: iomem range 0xe0000-0xfffff could not be reserved
[ 0.956591] system 00:00: iomem range 0x100000-0x7f6813ff could not be reserved
[ 0.956596] system 00:00: iomem range 0x7f681400-0x7f6fffff has been reserved
[ 0.956600] system 00:00: iomem range 0x7f700000-0x7f7fffff has been reserved
[ 0.956604] system 00:00: iomem range 0x7f700000-0x7fefffff could not be reserved
[ 0.956609] system 00:00: iomem range 0xffb00000-0xffffffff has been reserved
[ 0.956613] system 00:00: iomem range 0xfec00000-0xfec0ffff has been reserved
[ 0.956617] system 00:00: iomem range 0xfee00000-0xfee0ffff has been reserved
[ 0.956622] system 00:00: iomem range 0xfed20000-0xfed3ffff has been reserved
[ 0.956626] system 00:00: iomem range 0xfed45000-0xfed9ffff has been reserved
[ 0.956630] system 00:00: iomem range 0xffa80000-0xffa83fff could not be reserved
[ 0.956635] system 00:00: iomem range 0xf4000000-0xf4003fff has been reserved
[ 0.956639] system 00:00: iomem range 0xf4004000-0xf4004fff has been reserved
[ 0.956643] system 00:00: iomem range 0xf4005000-0xf4005fff has been reserved
[ 0.956647] system 00:00: iomem range 0xf4006000-0xf4006fff has been reserved
[ 0.956651] system 00:00: iomem range 0xf4008000-0xf400bfff has been reserved
[ 0.956656] system 00:00: iomem range 0xf0000000-0xf3ffffff has been reserved
[ 0.956667] system 00:02: ioport range 0x4d0-0x4d1 has been reserved
[ 0.956677] system 00:03: ioport range 0xf400-0xf4fe has been reserved
[ 0.956681] system 00:03: ioport range 0x1080-0x10bf has been reserved
[ 0.956685] system 00:03: ioport range 0x10c0-0x10df has been reserved
[ 0.956689] system 00:03: ioport range 0x809-0x809 has been reserved
[ 0.956702] system 00:08: ioport range 0xc80-0xcaf has been reserved
[ 0.956706] system 00:08: ioport range 0xcc0-0xcff could not be reserved
[ 0.956710] system 00:08: ioport range 0x910-0x91f has been reserved
[ 0.956714] system 00:08: ioport range 0x920-0x92f has been reserved
[ 0.956718] system 00:08: ioport range 0xcbc-0xcbf has been reserved
[ 0.956722] system 00:08: ioport range 0x930-0x97f has been reserved
[ 0.956733] system 00:0b: iomem range 0xfed00000-0xfed003ff has been reserved
[ 0.956744] system 00:0e: ioport range 0xcb0-0xcbb has been reserved
[ 0.956748] system 00:0e: iomem range 0xfed40000-0xfed44fff has been reserved
[ 0.991590] pci 0000:00:1c.0: PCI bridge, secondary bus 0000:0b
[ 0.991593] pci 0000:00:1c.0: IO window: disabled
[ 0.991602] pci 0000:00:1c.0: MEM window: disabled
[ 0.991608] pci 0000:00:1c.0: PREFETCH window: disabled
[ 0.991619] pci 0000:00:1c.1: PCI bridge, secondary bus 0000:0c
[ 0.991622] pci 0000:00:1c.1: IO window: disabled
[ 0.991631] pci 0000:00:1c.1: MEM window: 0xefd00000-0xefdfffff
[ 0.991638] pci 0000:00:1c.1: PREFETCH window: disabled
[ 0.991648] pci 0000:00:1c.2: PCI bridge, secondary bus 0000:09
[ 0.991651] pci 0000:00:1c.2: IO window: disabled
[ 0.991660] pci 0000:00:1c.2: MEM window: 0xefc00000-0xefcfffff
[ 0.991666] pci 0000:00:1c.2: PREFETCH window: disabled
[ 0.991685] pci 0000:02:01.0: CardBus bridge, secondary bus 0000:03
[ 0.991688] pci 0000:02:01.0: IO window: 0x002000-0x0020ff
[ 0.991695] pci 0000:02:01.0: IO window: 0x002400-0x0024ff
[ 0.991702] pci 0000:02:01.0: PREFETCH window: 0x88000000-0x8bffffff
[ 0.991709] pci 0000:02:01.0: MEM window: 0x8c000000-0x8fffffff
[ 0.991716] pci 0000:00:1e.0: PCI bridge, secondary bus 0000:02
[ 0.991721] pci 0000:00:1e.0: IO window: 0x2000-0x2fff
[ 0.991730] pci 0000:00:1e.0: MEM window: 0xefb00000-0xefbfffff
[ 0.991737] pci 0000:00:1e.0: PREFETCH window: 0x00000088000000-0x0000008bffffff
[ 0.991762] pci 0000:00:1c.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
[ 0.991770] pci 0000:00:1c.0: setting latency timer to 64
[ 0.991783] pci 0000:00:1c.1: PCI INT B -> GSI 17 (level, low) -> IRQ 17
[ 0.991791] pci 0000:00:1c.1: setting latency timer to 64
[ 0.991805] pci 0000:00:1c.2: PCI INT C -> GSI 18 (level, low) -> IRQ 18
[ 0.991812] pci 0000:00:1c.2: setting latency timer to 64
[ 0.991823] pci 0000:00:1e.0: setting latency timer to 64
[ 0.991835] pci 0000:02:01.0: enabling device (0000 -> 0003)
[ 0.991842] pci 0000:02:01.0: PCI INT A -> GSI 19 (level, low) -> IRQ 19
[ 0.991853] bus: 00 index 0 io port: [0x00-0xffff]
[ 0.991858] bus: 00 index 1 mmio: [0x000000-0xffffffff]
[ 0.991862] bus: 0b index 0 mmio: [0x0-0x0]
[ 0.991865] bus: 0b index 1 mmio: [0x0-0x0]
[ 0.991867] bus: 0b index 2 mmio: [0x0-0x0]
[ 0.991870] bus: 0b index 3 mmio: [0x0-0x0]
[ 0.991873] bus: 0c index 0 mmio: [0x0-0x0]
[ 0.991876] bus: 0c index 1 mmio: [0xefd00000-0xefdfffff]
[ 0.991879] bus: 0c index 2 mmio: [0x0-0x0]
[ 0.991882] bus: 0c index 3 mmio: [0x0-0x0]
[ 0.991885] bus: 09 index 0 mmio: [0x0-0x0]
[ 0.991888] bus: 09 index 1 mmio: [0xefc00000-0xefcfffff]
[ 0.991891] bus: 09 index 2 mmio: [0x0-0x0]
[ 0.991893] bus: 09 index 3 mmio: [0x0-0x0]
[ 0.991897] bus: 02 index 0 io port: [0x2000-0x2fff]
[ 0.991900] bus: 02 index 1 mmio: [0xefb00000-0xefbfffff]
[ 0.991903] bus: 02 index 2 mmio: [0x88000000-0x8bffffff]
[ 0.991906] bus: 02 index 3 io port: [0x00-0xffff]
[ 0.991909] bus: 02 index 4 mmio: [0x000000-0xffffffff]
[ 0.991913] bus: 03 index 0 io port: [0x2000-0x20ff]
[ 0.991916] bus: 03 index 1 io port: [0x2400-0x24ff]
[ 0.991919] bus: 03 index 2 mmio: [0x88000000-0x8bffffff]
[ 0.991922] bus: 03 index 3 mmio: [0x8c000000-0x8fffffff]
[ 0.991935] NET: Registered protocol family 2
[ 1.004094] IP route cache hash table entries: 32768 (order: 5, 131072 bytes)
[ 1.004472] TCP established hash table entries: 131072 (order: 8, 1048576 bytes)
[ 1.004980] TCP bind hash table entries: 65536 (order: 7, 524288 bytes)
[ 1.005257] TCP: Hash tables configured (established 131072 bind 65536)
[ 1.005261] TCP reno registered
[ 1.012105] NET: Registered protocol family 1
[ 1.012280] checking if image is initramfs... it is
[ 1.501015] Clocksource tsc unstable (delta = 1913503732 ns)
[ 2.012703] Freeing initrd memory: 7351k freed
[ 2.013042] cpufreq: No nForce2 chipset.
[ 2.013263] audit: initializing netlink socket (disabled)
[ 2.013298] type=2000 audit(1256383958.012:1): initialized
[ 2.024980] highmem bounce pool size: 64 pages
[ 2.024987] HugeTLB registered 4 MB page size, pre-allocated 0 pages
[ 2.027165] VFS: Disk quotas dquot_6.5.1
[ 2.027263] Dquot-cache hash table entries: 1024 (order 0, 4096 bytes)
[ 2.028248] fuse init (API version 7.10)
[ 2.028390] msgmni has been set to 1698
[ 2.028694] alg: No test for stdrng (krng)
[ 2.028714] io scheduler noop registered
[ 2.028718] io scheduler anticipatory registered
[ 2.028721] io scheduler deadline registered
[ 2.028741] io scheduler cfq registered (default)
[ 2.028758] pci 0000:00:02.0: Boot video device
[ 2.074498] pcieport-driver 0000:00:1c.0: setting latency timer to 64
[ 2.074566] pcieport-driver 0000:00:1c.0: found MSI capability
[ 2.074615] pcieport-driver 0000:00:1c.0: irq 2303 for MSI/MSI-X
[ 2.074637] pci_express 0000:00:1c.0:pcie00: allocate port service
[ 2.074659] pci_express 0000:00:1c.0:pcie02: allocate port service
[ 2.074679] pci_express 0000:00:1c.0:pcie03: allocate port service
[ 2.074780] pcieport-driver 0000:00:1c.1: setting latency timer to 64
[ 2.074844] pcieport-driver 0000:00:1c.1: found MSI capability
[ 2.074888] pcieport-driver 0000:00:1c.1: irq 2302 for MSI/MSI-X
[ 2.074909] pci_express 0000:00:1c.1:pcie00: allocate port service
[ 2.074929] pci_express 0000:00:1c.1:pcie02: allocate port service
[ 2.074949] pci_express 0000:00:1c.1:pcie03: allocate port service
[ 2.075049] pcieport-driver 0000:00:1c.2: setting latency timer to 64
[ 2.075113] pcieport-driver 0000:00:1c.2: found MSI capability
[ 2.075157] pcieport-driver 0000:00:1c.2: irq 2301 for MSI/MSI-X
[ 2.075181] pci_express 0000:00:1c.2:pcie00: allocate port service
[ 2.075205] pci_express 0000:00:1c.2:pcie02: allocate port service
[ 2.075225] pci_express 0000:00:1c.2:pcie03: allocate port service
[ 2.075343] pci_hotplug: PCI Hot Plug PCI Core version: 0.5
[ 2.075473] pciehp: PCI Express Hot Plug Controller Driver version: 0.4
[ 2.078933] ACPI: AC Adapter [AC] (on-line)
[ 2.120959] ACPI: Battery Slot [BAT0] (battery present)
[ 2.121090] input: Lid Switch as /devices/LNXSYSTM:00/device:00/PNP0C0D:00/input/input0
[ 2.121673] ACPI: Lid Switch [LID]
[ 2.121744] input: Power Button (CM) as /devices/LNXSYSTM:00/device:00/PNP0C0C:00/input/input1
[ 2.121752] ACPI: Power Button (CM) [PBTN]
[ 2.121817] input: Sleep Button (CM) as /devices/LNXSYSTM:00/device:00/PNP0C0E:00/input/input2
[ 2.121821] ACPI: Sleep Button (CM) [SBTN]
[ 2.122683] ACPI: SSDT 7F6821BC, 01C0 (r1 PmRef Cpu0Ist 3000 INTL 20050624)
[ 2.123184] ACPI: SSDT 7F681F71, 01C6 (r1 PmRef Cpu0Cst 3001 INTL 20050624)
[ 2.123721] ACPI: CPU0 (power states: C1[C1] C2[C2] C3[C3])
[ 2.123761] processor ACPI_CPU:00: registered as cooling_device0
[ 2.123767] ACPI: Processor [CPU0] (supports 8 throttling states)
[ 2.124304] ACPI: SSDT 7F68237C, 00C4 (r1 PmRef Cpu1Ist 3000 INTL 20050624)
[ 2.124779] ACPI: SSDT 7F682137, 0085 (r1 PmRef Cpu1Cst 3000 INTL 20050624)
[ 2.125356] ACPI: CPU1 (power states: C1[C1] C2[C2] C3[C3])
[ 2.125387] processor ACPI_CPU:01: registered as cooling_device1
[ 2.125393] ACPI: Processor [CPU1] (supports 8 throttling states)
[ 2.168755] thermal LNXTHERM:01: registered as thermal_zone0
[ 2.172983] ACPI: Thermal Zone [THM] (68 C)
[ 2.173088] isapnp: Scanning for PnP cards...
[ 2.527179] isapnp: No Plug & Play device found
[ 2.537293] Serial: 8250/16550 driver4 ports, IRQ sharing enabled
[ 2.537438] serial8250: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
[ 2.538173] 00:0c: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
[ 2.539333] brd: module loaded
[ 2.539823] loop: module loaded
[ 2.539929] Fixed MDIO Bus: probed
[ 2.539938] PPP generic driver version 2.4.2
[ 2.540022] input: Macintosh mouse button emulation as /devices/virtual/input/input3
[ 2.540067] Driver 'sd' needs updating - please use bus_type methods
[ 2.540081] Driver 'sr' needs updating - please use bus_type methods
[ 2.540204] ata_piix 0000:00:1f.1: version 2.12
[ 2.540216] ata_piix 0000:00:1f.1: PCI INT A -> GSI 16 (level, low) -> IRQ 16
[ 2.540267] ata_piix 0000:00:1f.1: setting latency timer to 64
[ 2.540396] scsi0 : ata_piix
[ 2.540525] scsi1 : ata_piix
[ 2.541493] ata1: PATA max UDMA/100 cmd 0x1f0 ctl 0x3f6 bmdma 0xbfa0 irq 14
[ 2.541497] ata2: PATA max UDMA/100 cmd 0x170 ctl 0x376 bmdma 0xbfa8 irq 15
[ 2.704744] ata1.00: ATA-7: TOSHIBA MK1011GAH, BK001G, max UDMA/100
[ 2.704749] ata1.00: 195371568 sectors, multi 8: LBA48
[ 2.712676] ata1.00: configured for UDMA/100
[ 2.712738] ata2: port disabled. ignoring.
[ 2.712907] scsi 0:0:0:0: Direct-Access ATA TOSHIBA MK1011GA BK00 PQ: 0 ANSI: 5
[ 2.713063] sd 0:0:0:0: [sda] 195371568 512-byte hardware sectors: (100 GB/93.1 GiB)
[ 2.713090] sd 0:0:0:0: [sda] Write Protect is off
[ 2.713094] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
[ 2.713136] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[ 2.713228] sd 0:0:0:0: [sda] 195371568 512-byte hardware sectors: (100 GB/93.1 GiB)
[ 2.713251] sd 0:0:0:0: [sda] Write Protect is off
[ 2.713255] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
[ 2.713295] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[ 2.713300] sda: sda1 sda2 sda3 sda4
[ 2.777053] sd 0:0:0:0: [sda] Attached SCSI disk
[ 2.777128] sd 0:0:0:0: Attached scsi generic sg0 type 0
[ 2.778198] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
[ 2.778230] ehci_hcd 0000:00:1d.7: PCI INT A -> GSI 20 (level, low) -> IRQ 20
[ 2.778260] ehci_hcd 0000:00:1d.7: setting latency timer to 64
[ 2.778264] ehci_hcd 0000:00:1d.7: EHCI Host Controller
[ 2.778353] ehci_hcd 0000:00:1d.7: new USB bus registered, assigned bus number 1
[ 2.782268] ehci_hcd 0000:00:1d.7: debug port 1
[ 2.782278] ehci_hcd 0000:00:1d.7: cache line size of 32 is not supported
[ 2.782298] ehci_hcd 0000:00:1d.7: irq 20, io mem 0xffa80000
[ 2.796025] ehci_hcd 0000:00:1d.7: USB 2.0 started, EHCI 1.00
[ 2.796139] usb usb1: configuration #1 chosen from 1 choice
[ 2.796186] hub 1-0:1.0: USB hub found
[ 2.796197] hub 1-0:1.0: 8 ports detected
[ 2.796363] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
[ 2.796389] uhci_hcd: USB Universal Host Controller Interface driver
[ 2.796423] uhci_hcd 0000:00:1d.0: PCI INT A -> GSI 20 (level, low) -> IRQ 20
[ 2.796432] uhci_hcd 0000:00:1d.0: setting latency timer to 64
[ 2.796437] uhci_hcd 0000:00:1d.0: UHCI Host Controller
[ 2.796511] uhci_hcd 0000:00:1d.0: new USB bus registered, assigned bus number 2
[ 2.796543] uhci_hcd 0000:00:1d.0: irq 20, io base 0x0000bf80
[ 2.796657] usb usb2: configuration #1 chosen from 1 choice
[ 2.796698] hub 2-0:1.0: USB hub found
[ 2.796708] hub 2-0:1.0: 2 ports detected
[ 2.796842] uhci_hcd 0000:00:1d.1: PCI INT B -> GSI 21 (level, low) -> IRQ 21
[ 2.796851] uhci_hcd 0000:00:1d.1: setting latency timer to 64
[ 2.796856] uhci_hcd 0000:00:1d.1: UHCI Host Controller
[ 2.796924] uhci_hcd 0000:00:1d.1: new USB bus registered, assigned bus number 3
[ 2.796966] uhci_hcd 0000:00:1d.1: irq 21, io base 0x0000bf60
[ 2.797075] usb usb3: configuration #1 chosen from 1 choice
[ 2.797120] hub 3-0:1.0: USB hub found
[ 2.797128] hub 3-0:1.0: 2 ports detected
[ 2.797257] uhci_hcd 0000:00:1d.2: PCI INT C -> GSI 22 (level, low) -> IRQ 22
[ 2.797267] uhci_hcd 0000:00:1d.2: setting latency timer to 64
[ 2.797272] uhci_hcd 0000:00:1d.2: UHCI Host Controller
[ 2.797335] uhci_hcd 0000:00:1d.2: new USB bus registered, assigned bus number 4
[ 2.797377] uhci_hcd 0000:00:1d.2: irq 22, io base 0x0000bf40
[ 2.797489] usb usb4: configuration #1 chosen from 1 choice
[ 2.797529] hub 4-0:1.0: USB hub found
[ 2.797538] hub 4-0:1.0: 2 ports detected
[ 2.797666] uhci_hcd 0000:00:1d.3: PCI INT D -> GSI 23 (level, low) -> IRQ 23
[ 2.797674] uhci_hcd 0000:00:1d.3: setting latency timer to 64
[ 2.797680] uhci_hcd 0000:00:1d.3: UHCI Host Controller
[ 2.797747] uhci_hcd 0000:00:1d.3: new USB bus registered, assigned bus number 5
[ 2.797789] uhci_hcd 0000:00:1d.3: irq 23, io base 0x0000bf20
[ 2.797898] usb usb5: configuration #1 chosen from 1 choice
[ 2.797941] hub 5-0:1.0: USB hub found
[ 2.797950] hub 5-0:1.0: 2 ports detected
[ 2.798171] PNP: PS/2 Controller [PNP0303:KBC,PNP0f13:PS2M] at 0x60,0x64 irq 1,12
[ 2.801315] serio: i8042 KBD port at 0x60,0x64 irq 1
[ 2.801324] serio: i8042 AUX port at 0x60,0x64 irq 12
[ 2.804069] mice: PS/2 mouse device common for all mice
[ 2.820112] rtc_cmos 00:06: RTC can wake from S4
[ 2.820179] rtc_cmos 00:06: rtc core: registered rtc_cmos as rtc0
[ 2.820218] rtc0: alarms up to one month, y3k, 114 bytes nvram, hpet irqs
[ 2.820312] device-mapper: uevent: version 1.0.3
[ 2.820468] device-mapper: ioctl: 4.14.0-ioctl (2008-04-23) initialised: dm-devel@redhat.com
[ 2.820632] device-mapper: multipath: version 1.0.5 loaded
[ 2.820636] device-mapper: multipath round-robin: version 1.0.0 loaded
[ 2.820767] EISA: Probing bus 0 at eisa.0
[ 2.820771] EISA: Cannot allocate resource for mainboard
[ 2.820775] Cannot allocate resource for EISA slot 1
[ 2.820779] Cannot allocate resource for EISA slot 2
[ 2.820812] EISA: Detected 0 cards.
[ 2.821020] cpuidle: using governor ladder
[ 2.821215] cpuidle: using governor menu
[ 2.822037] TCP cubic registered
[ 2.822203] NET: Registered protocol family 10
[ 2.822808] input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input4
[ 2.822891] lo: Disabled Privacy Extensions
[ 2.823430] NET: Registered protocol family 17
[ 2.823456] Bluetooth: L2CAP ver 2.11
[ 2.823459] Bluetooth: L2CAP socket layer initialized
[ 2.823463] Bluetooth: SCO (Voice Link) ver 0.6
[ 2.823466] Bluetooth: SCO socket layer initialized
[ 2.823540] Bluetooth: RFCOMM socket layer initialized
[ 2.823550] Bluetooth: RFCOMM TTY layer initialized
[ 2.823553] Bluetooth: RFCOMM ver 1.10
[ 2.824273] Using IPI No-Shortcut mode
[ 2.824376] registered taskstats version 1
[ 2.824533] Magic number: 13:471:530
[ 2.824638] rtc_cmos 00:06: setting system clock to 2009-10-24 11:32:39 UTC (1256383959)
[ 2.824643] BIOS EDD facility v0.16 2004-Jun-25, 0 devices found
[ 2.824646] EDD information not available.
[ 2.825014] Freeing unused kernel memory: 532k freed
[ 2.825250] Write protecting the kernel text: 4120k
[ 2.825340] Write protecting the kernel read-only data: 1524k
[ 3.187212] tg3.c:v3.94 (August 14, 2008)
[ 3.187243] tg3 0000:09:00.0: PCI INT A -> GSI 18 (level, low) -> IRQ 18
[ 3.187330] tg3 0000:09:00.0: setting latency timer to 64
[ 3.209335] eth0: Tigon3 [partno(BCM95752) rev 6002 PHY(5752)] (PCI Express) 10/100/1000Base-T Ethernet 00:1c:23:0d:ab:64
[ 3.209341] eth0: RXcsums[1] LinkChgREG[0] MIirq[0] ASF[0] WireSpeed[1] TSOcap[1]
[ 3.209345] eth0: dma_rwctrl[76180000] dma_mask[64-bit]
[ 3.225030] usb 1-8: new high speed USB device using ehci_hcd and address 3
[ 3.357500] usb 1-8: configuration #1 chosen from 1 choice
[ 3.357661] hub 1-8:1.0: USB hub found
[ 3.357739] hub 1-8:1.0: 7 ports detected
[ 3.405177] ohci1394 0000:02:01.1: PCI INT B -> GSI 17 (level, low) -> IRQ 17
[ 3.458037] ohci1394: fw-host0: OHCI-1394 1.1 (PCI): IRQ=[17] MMIO=[efbff800-efbfffff] Max Packet=[2048] IR/IT contexts=[4/4]
[ 3.640077] usb 2-2: new full speed USB device using uhci_hcd and address 2
[ 3.730139] PM: Starting manual resume from disk
[ 3.730144] PM: Resume from partition 8:4
[ 3.730146] PM: Checking hibernation image.
[ 3.730469] PM: Resume from disk failed.
[ 3.792738] usb 2-2: configuration #1 chosen from 1 choice
[ 3.794671] hub 2-2:1.0: USB hub found
[ 3.796633] hub 2-2:1.0: 4 ports detected
[ 3.892141] usb 1-8.1: new high speed USB device using ehci_hcd and address 4
[ 3.984999] usb 1-8.1: configuration #1 chosen from 1 choice
[ 4.184147] usb 1-8.7: new low speed USB device using ehci_hcd and address 5
[ 4.278219] usb 1-8.7: configuration #1 chosen from 1 choice
[ 4.353633] usb 2-2.3: new full speed USB device using uhci_hcd and address 3
[ 4.481674] usb 2-2.3: configuration #1 chosen from 1 choice
[ 4.483677] hub 2-2.3:1.0: USB hub found
[ 4.485634] hub 2-2.3:1.0: 3 ports detected
[ 4.565641] usb 2-2.4: new full speed USB device using uhci_hcd and address 4
[ 4.792726] usb 2-2.4: configuration #1 chosen from 1 choice
[ 4.828194] ieee1394: Host added: ID:BUS[0-00:1023] GUID[324fc000321c0c70]
[ 4.869634] usb 2-2.3.2: new full speed USB device using uhci_hcd and address 5
[ 4.986715] usb 2-2.3.2: configuration #1 chosen from 1 choice
[ 13.018836] udev: starting version 141
[ 13.364125] cfg80211: Calling CRDA to update world regulatory domain
[ 13.455257] Linux agpgart interface v0.103
[ 13.839650] cfg80211: World regulatory domain updated:
[ 13.839656] (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp)
[ 13.839660] (2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[ 13.839664] (2457000 KHz - 2482000 KHz @ 20000 KHz), (300 mBi, 2000 mBm)
[ 13.839668] (2474000 KHz - 2494000 KHz @ 20000 KHz), (300 mBi, 2000 mBm)
[ 13.839672] (5170000 KHz - 5250000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[ 13.839675] (5735000 KHz - 5835000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[ 14.085263] parport_pc 00:0d: reported by Plug and Play ACPI
[ 14.085350] parport0: PC-style at 0x378 (0x778), irq 7, dma 1 [PCSPP,TRISTATE,COMPAT,ECP,DMA]
[ 14.461281] agpgart-intel 0000:00:00.0: Intel 945GM Chipset
[ 14.462424] agpgart-intel 0000:00:00.0: detected 7932K stolen memory
[ 14.466224] agpgart-intel 0000:00:00.0: AGP aperture is 256M @ 0xd0000000
[ 14.510521] sdhci: Secure Digital Host Controller Interface driver
[ 14.510526] sdhci: Copyright(c) Pierre Ossman
[ 14.512933] sdhci-pci 0000:02:01.2: SDHCI controller found [1180:0822] (rev 18)
[ 14.512955] sdhci-pci 0000:02:01.2: PCI INT C -> GSI 18 (level, low) -> IRQ 18
[ 14.516101] mmc0: SDHCI controller on PCI [0000:02:01.2] using DMA
[ 14.565126] intel_rng: FWH not detected
[ 14.622216] yenta_cardbus 0000:02:01.0: CardBus bridge found [1028:0201]
[ 14.701423] Bluetooth: Generic Bluetooth USB driver ver 0.3
[ 14.701606] usbcore: registered new interface driver btusb
[ 14.724364] Initializing USB Mass Storage driver...
[ 14.724806] scsi2 : SCSI emulation for USB Mass Storage devices
[ 14.725069] usbcore: registered new interface driver usb-storage
[ 14.725109] usb-storage: device found at 4
[ 14.725112] usb-storage: waiting for device to settle before scanning
[ 14.725122] USB Mass Storage support registered.
[ 14.737282] ppdev: user-space parallel port driver
[ 14.749535] yenta_cardbus 0000:02:01.0: ISA IRQ mask 0x0c38, PCI irq 19
[ 14.749540] yenta_cardbus 0000:02:01.0: Socket status: 30000006
[ 14.749546] pci_bus 0000:02: Raising subordinate bus# of parent bus (#02) from #03 to #06
[ 14.749556] yenta_cardbus 0000:02:01.0: pcmcia: parent PCI bridge I/O window: 0x2000 - 0x2fff
[ 14.749561] pcmcia_socket pcmcia_socket0: cs: IO port probe 0x2000-0x2fff: clean.
[ 14.749947] yenta_cardbus 0000:02:01.0: pcmcia: parent PCI bridge Memory window: 0xefb00000 - 0xefbfffff
[ 14.749951] yenta_cardbus 0000:02:01.0: pcmcia: parent PCI bridge Memory window: 0x88000000 - 0x8bffffff
[ 14.756688] usbcore: registered new interface driver hiddev
[ 14.758898] input: HID 062a:0000 as /devices/pci0000:00/0000:00:1d.7/usb1/1-8/1-8.7/1-8.7:1.0/input/input5
[ 14.761211] generic-usb 0003:062A:0000.0001: input,hidraw0: USB HID v1.10 Mouse [HID 062a:0000] on usb-0000:00:1d.7-8.7/input0
[ 14.761245] usbcore: registered new interface driver usbhid
[ 14.761282] usbhid: v2.6:USB HID core driver
[ 14.769373] dcdbas dcdbas: Dell Systems Management Base Driver (version 5.6.0-3.2)
[ 14.770819] input: PC Speaker as /devices/platform/pcspkr/input/input6
[ 14.775528] input: Video Bus as /devices/LNXSYSTM:00/device:00/PNP0A03:00/device:20/input/input7
[ 14.784181] ACPI: Video Device [VID] (multi-head: yes rom: no post: no)
[ 14.784285] ACPI Warning (nspredef-0357): \_SB_.PCI0.VID2._DOD: Return Package has no elements (empty) [20080926]
[ 14.784457] input: Video Bus as /devices/LNXSYSTM:00/device:00/PNP0A03:00/device:25/input/input8
[ 14.787615] ACPI: Video Device [VID2] (multi-head: yes rom: no post: no)
[ 14.935105] iTCO_vendor_support: vendor-support=0
[ 14.959833] synaptics was reset on resume, see synaptics_resume_reset if you have trouble on resume
[ 14.978365] iTCO_wdt: Intel TCO WatchDog Timer Driver v1.05
[ 14.978665] iTCO_wdt: Found a ICH7-M or ICH7-U TCO device (Version=2, TCOBASE=0x1060)
[ 14.978791] iTCO_wdt: initialized. heartbeat=30 sec (nowayout=0)
[ 15.125818] iwlagn: Intel(R) Wireless WiFi Link AGN driver for Linux, 1.3.27ks
[ 15.125823] iwlagn: Copyright(c) 2003-2008 Intel Corporation
[ 15.126060] iwlagn 0000:0c:00.0: PCI INT A -> GSI 17 (level, low) -> IRQ 17
[ 15.126099] iwlagn 0000:0c:00.0: setting latency timer to 64
[ 15.126241] iwlagn: Detected Intel Wireless WiFi Link 4965AGN REV=0x4
[ 15.169063] iwlagn: Tunable channels: 13 802.11bg, 19 802.11a channels
[ 15.169187] iwlagn 0000:0c:00.0: irq 2300 for MSI/MSI-X
[ 15.171020] phy0: Selected rate control algorithm 'iwl-agn-rs'
[ 15.251005] pcmcia_socket pcmcia_socket0: cs: IO port probe 0x100-0x3af: clean.
[ 15.253252] pcmcia_socket pcmcia_socket0: cs: IO port probe 0x3e0-0x4ff: clean.
[ 15.254171] pcmcia_socket pcmcia_socket0: cs: IO port probe 0x820-0x8ff: clean.
[ 15.254963] pcmcia_socket pcmcia_socket0: cs: IO port probe 0xc00-0xcf7: clean.
[ 15.255808] pcmcia_socket pcmcia_socket0: cs: IO port probe 0xa00-0xaff: clean.
[ 15.426756] HDA Intel 0000:00:1b.0: PCI INT A -> GSI 21 (level, low) -> IRQ 21
[ 15.426883] HDA Intel 0000:00:1b.0: setting latency timer to 64
[ 15.655520] lp0: using parport0 (interrupt-driven).
[ 15.769490] Adding 2449904k swap on /dev/sda4. Priority:-1 extents:1 across:2449904k
[ 15.876658] input: PS/2 Mouse as /devices/platform/i8042/serio1/input/input9
[ 15.906229] input: AlpsPS/2 ALPS GlidePoint as /devices/platform/i8042/serio1/input/input10
[ 17.993886] type=1505 audit(1256376774.667:2): operation="profile_load" name="/usr/share/gdm/guest-session/Xsession" name2="default" pid=2120
[ 18.067868] type=1505 audit(1256376774.740:3): operation="profile_load" name="/sbin/dhclient-script" name2="default" pid=2124
[ 18.068052] type=1505 audit(1256376774.740:4): operation="profile_load" name="/sbin/dhclient3" name2="default" pid=2124
[ 18.068119] type=1505 audit(1256376774.740:5): operation="profile_load" name="/usr/lib/NetworkManager/nm-dhcp-client.action" name2="default" pid=2124
[ 18.068182] type=1505 audit(1256376774.740:6): operation="profile_load" name="/usr/lib/connman/scripts/dhclient-script" name2="default" pid=2124
[ 18.274215] type=1505 audit(1256376774.948:7): operation="profile_load" name="/usr/lib/cups/backend/cups-pdf" name2="default" pid=2129
[ 18.274468] type=1505 audit(1256376774.948:8): operation="profile_load" name="/usr/sbin/cupsd" name2="default" pid=2129
[ 18.318858] type=1505 audit(1256376774.992:9): operation="profile_load" name="/usr/sbin/tcpdump" name2="default" pid=2133
[ 19.724264] usb-storage: device scan complete
[ 19.726834] scsi 2:0:0:0: CD-ROM HL-DT-ST DVD+-RW GWA4083N B105 PQ: 0 ANSI: 0
[ 19.740311] sr0: scsi3-mmc drive: 24x/24x writer cd/rw xa/form2 cdda tray
[ 19.740318] Uniform CD-ROM driver Revision: 3.20
[ 19.740475] sr 2:0:0:0: Attached scsi CD-ROM sr0
[ 19.740593] sr 2:0:0:0: Attached scsi generic sg1 type 5
[ 24.630267] Bluetooth: BNEP (Ethernet Emulation) ver 1.3
[ 24.630273] Bluetooth: BNEP filters: protocol multicast
[ 24.670790] Bridge firewalling registered
[ 27.947946] [drm] Initialized drm 1.1.0 20060810
[ 28.058173] pci 0000:00:02.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
[ 28.058181] pci 0000:00:02.0: setting latency timer to 64
[ 28.058420] [drm] Initialized i915 1.6.0 20080730 on minor 0
[ 28.061463] [drm:i915_setparam] *ERROR* unknown parameter 4
[ 28.061501] [drm:i915_getparam] *ERROR* Unknown parameter 6
[ 29.906617] [drm:i915_getparam] *ERROR* Unknown parameter 6
[ 30.326822] tg3 0000:09:00.0: irq 2299 for MSI/MSI-X
[ 30.409174] ADDRCONF(NETDEV_UP): eth0: link is not ready
[ 30.414870] iwlagn 0000:0c:00.0: firmware: requesting iwlwifi-4965-2.ucode
[ 30.715997] Registered led device: iwl-phy0:radio
[ 30.716047] Registered led device: iwl-phy0:assoc
[ 30.716079] Registered led device: iwl-phy0:RX
[ 30.716107] Registered led device: iwl-phy0:TX
[ 30.741194] ADDRCONF(NETDEV_UP): wlan0: link is not ready
[ 31.733641] wlan0: authenticate with AP 00:16:41:be:a6:fc
[ 31.735629] wlan0: authenticated
[ 31.735633] wlan0: associate with AP 00:16:41:be:a6:fc
[ 31.738231] wlan0: RX AssocResp from 00:16:41:be:a6:fc (capab=0x401 status=0 aid=1)
[ 31.738235] wlan0: associated
[ 31.758614] ADDRCONF(NETDEV_CHANGE): wlan0: link becomes ready
[ 31.758709] wlan0: disassociating by local choice (reason=3)
[ 32.028429] tg3: eth0: Link is up at 100 Mbps, full duplex.
[ 32.028435] tg3: eth0: Flow control is on for TX and on for RX.
[ 32.028747] ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready
[ 42.400028] wlan0: no IPv6 routers present
[ 42.700048] eth0: no IPv6 routers present
[ 404.478727] process `skype' is using obsolete setsockopt SO_BSDCOMPAT
patrice@patrice:~$